dmesg - 2015-03-10 03:46
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-504.8.1.el6.x86_64 (mockbuild@x86-002.build.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-9) (GCC) ) #1 SMP Fri Dec 19 12:09:25 EST 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfffc000 (usable)
BIOS-e820: 00000000dfffc000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000003ea0000000 (usable)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xF12E0
DMI: OpenStack Foundation OpenStack Nova, BIOS Bochs 01/01/2011
Hypervisor detected: KVM
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3ea0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
last_pfn = 0xdfffc max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dfffc000
0000000000 - 00c0000000 page 1G
00c0000000 - 00dfe00000 page 2M
00dfe00000 - 00dfffc000 page 4k
kernel direct mapping tables up to dfffc000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000003ea0000000
0100000000 - 3e80000000 page 1G
3e80000000 - 3ea0000000 page 2M
kernel direct mapping tables up to 3ea0000000 @ a000-c000
RAMDISK: 36f4b000 - 37fef60a
ACPI: RSDP 00000000000f12b0 00014 (v00 BOCHS )
ACPI: RSDT 00000000dfffc8e0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000dffff430 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000dfffc920 01137 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 00000000dffff3c0 00040
ACPI: SSDT 00000000dfffdcc0 016FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000dfffdaa0 001B0 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 00000000dfffda60 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000003ea0000000
Bootmem setup node 0 0000000000000000-0000003ea0000000
NODE_DATA [000000000000b000 - 000000000003efff]
bootmap [0000000000100000 - 00000000008d3fff] pages 7d4
(8 early reservations) ==> bootmem [0000000000 - 3ea0000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000202abe4] TEXT DATA BSS ==> [0001000000 - 000202abe4]
#3 [0036f4b000 - 0037fef60a] RAMDISK ==> [0036f4b000 - 0037fef60a]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [000202b000 - 000202b2fd] BRK ==> [000202b000 - 000202b2fd]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
found SMP MP-table at [ffff8800000f1300] f1300
Reserving 144MB of memory at 48MB for crashkernel (System RAM: 256512MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c27841, boot clock
[ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
[ffffea000ee00000-ffffea003fffffff] PMD -> [ffff880038000000-ffff8800691fffff] on node 0
[ffffea0040000000-ffffea007fffffff] PMD -> [ffff880069400000-ffff8800a93fffff] on node 0
[ffffea0080000000-ffffea00b67fffff] PMD -> [ffff8800a9600000-ffff8800dfdfffff] on node 0
[ffffea00b6800000-ffffea00bfffffff] PMD -> [ffff880100000000-ffff8801097fffff] on node 0
[ffffea00c0000000-ffffea00db3fffff] PMD -> [ffff880109a00000-ffff880124dfffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x03ea0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000dfffc
0: 0x00100000 -> 0x03ea0000
On node 0 totalpages: 65535898
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3840 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899124 pages, LIFO batch:31
Normal zone: 883456 pages used for memmap
Normal zone: 63735040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1f] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x27] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 40 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfffc000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:40 nr_cpu_ids:40 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880124e00000 s90968 r8192 d23720 u131072
pcpu-alloc: s90968 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 -- -- -- -- -- -- -- --
kvm-clock: cpu 0, msr 1:24e15841, primary cpu clock
kvm-stealtime: cpu 0, msr 124e0d880
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64638004
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 258304932k/262668288k available (5336k kernel code, 524696k absent, 3838660k reserved, 7016k data, 1292k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:728
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 1048576000 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 2799.998 MHz processor.
Calibrating delay loop (skipped) preset value.. 5599.99 BogoMIPS (lpj=2799998)
pid_max: default: 40960 minimum: 320
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 10 MCE banks
alternatives: switching to unfair spinlock
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21918 entries in 86 pages
Enabling x2apic
Enabled x2apic
APIC routing finalized to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Xeon E312xx (Sandy Bridge) stepping 01
Performance Events: 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata, please upgrade microcode
... version: 2
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
kvm-clock: cpu 1, msr 1:24e35841, secondary cpu clock
kvm-stealtime: cpu 1, msr 124e2d880
#2
kvm-clock: cpu 2, msr 1:24e55841, secondary cpu clock
kvm-stealtime: cpu 2, msr 124e4d880
#3
kvm-clock: cpu 3, msr 1:24e75841, secondary cpu clock
kvm-stealtime: cpu 3, msr 124e6d880
#4
kvm-clock: cpu 4, msr 1:24e95841, secondary cpu clock
kvm-stealtime: cpu 4, msr 124e8d880
#5
kvm-clock: cpu 5, msr 1:24eb5841, secondary cpu clock
kvm-stealtime: cpu 5, msr 124ead880
#6
kvm-clock: cpu 6, msr 1:24ed5841, secondary cpu clock
kvm-stealtime: cpu 6, msr 124ecd880
#7
kvm-clock: cpu 7, msr 1:24ef5841, secondary cpu clock
kvm-stealtime: cpu 7, msr 124eed880
#8
kvm-clock: cpu 8, msr 1:24f15841, secondary cpu clock
kvm-stealtime: cpu 8, msr 124f0d880
#9
kvm-clock: cpu 9, msr 1:24f35841, secondary cpu clock
kvm-stealtime: cpu 9, msr 124f2d880
#10
kvm-clock: cpu 10, msr 1:24f55841, secondary cpu clock
kvm-stealtime: cpu 10, msr 124f4d880
#11
kvm-clock: cpu 11, msr 1:24f75841, secondary cpu clock
kvm-stealtime: cpu 11, msr 124f6d880
#12
kvm-clock: cpu 12, msr 1:24f95841, secondary cpu clock
kvm-stealtime: cpu 12, msr 124f8d880
#13
kvm-clock: cpu 13, msr 1:24fb5841, secondary cpu clock
kvm-stealtime: cpu 13, msr 124fad880
#14
kvm-clock: cpu 14, msr 1:24fd5841, secondary cpu clock
kvm-stealtime: cpu 14, msr 124fcd880
#15
kvm-clock: cpu 15, msr 1:24ff5841, secondary cpu clock
kvm-stealtime: cpu 15, msr 124fed880
#16
kvm-clock: cpu 16, msr 1:25015841, secondary cpu clock
kvm-stealtime: cpu 16, msr 12500d880
#17
kvm-clock: cpu 17, msr 1:25035841, secondary cpu clock
kvm-stealtime: cpu 17, msr 12502d880
#18
kvm-clock: cpu 18, msr 1:25055841, secondary cpu clock
kvm-stealtime: cpu 18, msr 12504d880
#19
kvm-clock: cpu 19, msr 1:25075841, secondary cpu clock
kvm-stealtime: cpu 19, msr 12506d880
#20
kvm-clock: cpu 20, msr 1:25095841, secondary cpu clock
kvm-stealtime: cpu 20, msr 12508d880
#21
kvm-clock: cpu 21, msr 1:250b5841, secondary cpu clock
kvm-stealtime: cpu 21, msr 1250ad880
#22
kvm-clock: cpu 22, msr 1:250d5841, secondary cpu clock
kvm-stealtime: cpu 22, msr 1250cd880
#23
kvm-clock: cpu 23, msr 1:250f5841, secondary cpu clock
kvm-stealtime: cpu 23, msr 1250ed880
#24
kvm-clock: cpu 24, msr 1:25115841, secondary cpu clock
kvm-stealtime: cpu 24, msr 12510d880
#25
kvm-clock: cpu 25, msr 1:25135841, secondary cpu clock
kvm-stealtime: cpu 25, msr 12512d880
#26
kvm-clock: cpu 26, msr 1:25155841, secondary cpu clock
kvm-stealtime: cpu 26, msr 12514d880
#27
kvm-clock: cpu 27, msr 1:25175841, secondary cpu clock
kvm-stealtime: cpu 27, msr 12516d880
#28
kvm-clock: cpu 28, msr 1:25195841, secondary cpu clock
kvm-stealtime: cpu 28, msr 12518d880
#29
kvm-clock: cpu 29, msr 1:251b5841, secondary cpu clock
kvm-stealtime: cpu 29, msr 1251ad880
#30
kvm-clock: cpu 30, msr 1:251d5841, secondary cpu clock
kvm-stealtime: cpu 30, msr 1251cd880
#31
kvm-clock: cpu 31, msr 1:251f5841, secondary cpu clock
kvm-stealtime: cpu 31, msr 1251ed880
#32
kvm-clock: cpu 32, msr 1:25215841, secondary cpu clock
kvm-stealtime: cpu 32, msr 12520d880
#33
kvm-clock: cpu 33, msr 1:25235841, secondary cpu clock
kvm-stealtime: cpu 33, msr 12522d880
#34
kvm-clock: cpu 34, msr 1:25255841, secondary cpu clock
kvm-stealtime: cpu 34, msr 12524d880
#35
kvm-clock: cpu 35, msr 1:25275841, secondary cpu clock
kvm-stealtime: cpu 35, msr 12526d880
#36
kvm-clock: cpu 36, msr 1:25295841, secondary cpu clock
kvm-stealtime: cpu 36, msr 12528d880
#37
kvm-clock: cpu 37, msr 1:252b5841, secondary cpu clock
kvm-stealtime: cpu 37, msr 1252ad880
#38
kvm-clock: cpu 38, msr 1:252d5841, secondary cpu clock
kvm-stealtime: cpu 38, msr 1252cd880
#39 Ok.
kvm-clock: cpu 39, msr 1:252f5841, secondary cpu clock
kvm-stealtime: cpu 39, msr 1252ed880
Brought up 40 CPUs
Total of 40 processors activated (223999.84 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2656 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
pci 0000:00:01.1: reg 20: [io 0xc0e0-0xc0ef]
pci 0000:00:01.2: reg 20: [io 0xc0c0-0xc0df]
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebf3000-0xfebf3fff]
pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:00:03.0: reg 10: [io 0xc0a0-0xc0bf]
pci 0000:00:03.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:00:04.0: reg 10: [io 0xc040-0xc07f]
pci 0000:00:04.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
pci 0000:00:05.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:05.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
pci 0000:00:06.0: reg 10: [io 0xc080-0xc09f]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x02f8-0x02ff]
pnp 00:06: [irq 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17041k freed
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1425618353.052:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key B874F50D334924E4
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
- Added public key CB445E0DA3EA1F65
- User ID: Red Hat Enterprise Linux Driver Update Program (key 4)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c0c0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2015-03-06 05:05:54 UTC (1425618354)
Initalizing network drop monitor service
Freeing unused kernel memory: 1292k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 788k freed
Freeing unused kernel memory: 1568k freed
dracut: dracut-004-356.el6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
usb 1-1: new full speed USB device number 2 using uhci_hcd
Refined TSC clocksource calibration: 2799.770 MHz.
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 42
usb 1-1: configuration #1 chosen from 1 choice
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input3
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 25 for MSI/MSI-X
vda: vda1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 26 for MSI/MSI-X
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 27 for MSI/MSI-X
vdb: unknown partition table
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
vda: vda1
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/vda1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1425618355.530:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 29 for MSI/MSI-X
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 30 for MSI/MSI-X
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
type=1305 audit(1425618358.597:3): audit_pid=1819 old=0 auid=4294967295 ses=4294967295 res=1
eth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3-fs (vdb): using internal journal
EXT3-fs (vdb): mounted filesystem with ordered data mode
pci 0000:00:07.0: reg 10: [io 0x0000-0x001f]
pci 0000:00:07.0: reg 14: [mem 0x00000000-0x00000fff]
pci 0000:00:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:07.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
pci 0000:00:07.0: BAR 1: assigned [mem 0xe0020000-0xe0020fff]
pci 0000:00:07.0: BAR 1: set to [mem 0xe0020000-0xe0020fff] (PCI address [0xe0020000-0xe0020fff]
pci 0000:00:07.0: BAR 0: assigned [io 0x1000-0x101f]
pci 0000:00:07.0: BAR 0: set to [io 0x1000-0x101f] (PCI address [0x1000-0x101f]
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pci 0000:00:01.0: no hotplug settings from platform
pci 0000:00:01.0: using default PCI settings
ata_piix 0000:00:01.1: no hotplug settings from platform
ata_piix 0000:00:01.1: using default PCI settings
uhci_hcd 0000:00:01.2: no hotplug settings from platform
uhci_hcd 0000:00:01.2: using default PCI settings
piix4_smbus 0000:00:01.3: no hotplug settings from platform
piix4_smbus 0000:00:01.3: using default PCI settings
pci 0000:00:02.0: no hotplug settings from platform
pci 0000:00:02.0: using default PCI settings
virtio-pci 0000:00:03.0: no hotplug settings from platform
virtio-pci 0000:00:03.0: using default PCI settings
virtio-pci 0000:00:04.0: no hotplug settings from platform
virtio-pci 0000:00:04.0: using default PCI settings
virtio-pci 0000:00:05.0: no hotplug settings from platform
virtio-pci 0000:00:05.0: using default PCI settings
virtio-pci 0000:00:06.0: no hotplug settings from platform
virtio-pci 0000:00:06.0: using default PCI settings
pci 0000:00:07.0: no hotplug settings from platform
pci 0000:00:07.0: using default PCI settings
virtio-pci 0000:00:07.0: enabling device (0000 -> 0003)
virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:07.0: irq 31 for MSI/MSI-X
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:07.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:07.0: irq 33 for MSI/MSI-X
eth1: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
dealII_base.cpu[12174] trap invalid opcode ip:50d3a3 sp:7fff3030e9a0 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.ws.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[12992] trap invalid opcode ip:50d3a3 sp:7fffe2d35180 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.ws.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[21928] trap invalid opcode ip:50d3a3 sp:7fffabf199e0 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[22576] trap invalid opcode ip:50d3a3 sp:7fff42e486a0 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]
hrtimer: interrupt took 5060523 ns
dealII_base.cpu[31123] trap invalid opcode ip:50d3a3 sp:7fffecbd9e00 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[32130] trap invalid opcode ip:50d3a3 sp:7fff7e033c60 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[4166] trap invalid opcode ip:50d3a3 sp:7fffe86bae40 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[4787] trap invalid opcode ip:50d3a3 sp:7fffe56e46c0 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[13532] trap invalid opcode ip:50d3a3 sp:7fff67783240 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]
dealII_base.cpu[14394] trap invalid opcode ip:50d3a3 sp:7fff91a590c0 error:0 in dealII_base.cpu2006.1.2.ic14.0.linux64.dt.avx2.rate.15aug2013[400000+219000]